Polycom Obi Edition: Provisioning
Written by Marissa Orsini
Updated at April 2nd, 2024
Table of Contents
Scope:
The following document will guide you on manually provisioning a Polycom D230 Cordless Phone as an example.
Requirements:
- Polycom D230
- IP Address of Polycom D230
- Access to Manager Portal
Register Handset to Base
- Once the Handset is botted up, press the OK button > Scroll down to Settings > Press Registration.
- Hold the Find button on the Base for about 5 seconds and the Handset will pair up with the Base.
Access the IP Adress of the Polycom D230
- On the Cordless Phone, Press the OK button > Scroll down to Settings > Press Basestation Info
- This is where you will grab the IP Address
- Enter IP Address onto the WEB
- Username: admin
- Password: admin
Add Phone to the Manage Portal
Manually Provisioning via Web Gui
- Enter the Device's IP address on a Browser.
- Log in using the following credentials.
- Username: admin
- Password: admin
- Then go to System Management > Auto Provisioning > ITSP Provisioning > ConfigURL.
- Scroll down to the very bottom of the page and click Submit.
- Then on the upper right, click Reboot.