Yealink Administrator Guide

http://support.yealink.com/documentFront/forwardToDocumentDetailPage?documentId=143

Null Values

You can override any provisioned value by entering %NULL%

I.e. firmware.url.server_type="%NULL%"

Directed Call Pickup

• features.pickup.direct_pickup_enable="1"
• features.pickup.direct_pickup_code="*35"

Distinctive Ring

The Distinctive Ring feature works by adding a department name to the extension

• account.1.alert_info_url_enable="1"
• distinctive_ring_tones.alert_info.1.text="Restaurant"
• distinctive_ring_tones.alert_info.1.ringer="2"

The example above will cause any Yealink phone to use Ringer 2 whenever a call is received from a member of the 'Restaurant' department.

NOTE: If your department has space(s) in it, do not include the space(s) when adding it to the override. 

Ringer Volume

It is sometimes necessary to lock the ringer volume at the administrative level. This can be done by setting the below value to 0 through 15, with 15 being the loudest. If any value is set, the rocker switch will not work. You can set this value to blank in order to restore volume rocker functionality.

force.voice.ring_vol="10"

Wallpaper Sizes

Original Yealink FAQ: http://support.yealink.com/faq/faqInfo?id=219

Default Wallpaper

• phone_setting.backgrounds="Config:Default.jpg"

Wallpaper T46G

• phone_setting.backgrounds="Config:t46g.jpg"
• wallpaper_upload.url="http://yourdomain.com/images/t46g.jpg"

Wallpaper T48G

• phone_setting.backgrounds="Config:t48g.png"
• wallpaper_upload.url="http://yourdomain.com/images/t48g.jpg"

Allow Remote Control From IPs

features.action_uri_limit_ip="any"

or

features.action_uri_limit_ip="192.168.0.1"

Programmable Key

(Replace 'X' with the number of the key you are setting)

• programablekey.X.type=
• programablekey.X.line=
• programablekey.X.value=
• programablekey.X.xml_phonebook=
• programablekey.X.history_type=
• programablekey.X.label=

Line Key Types

Line Key Configuration:
(Replace 'X' with the number of the BLF key you are setting & replace 'Y' with the Line Key Type #.)

linekey.X.type = "Y"
linekey.X.value = “(this may vary, depending on the line key type, but usually is an Extension)”
linekey.X.label = "Label"

• 0-NA 
• 1-Conference 
• 2-Forward 
• 3-Transfer 
• 4-Hold 
• 5-DND 
• 7-Call Return 
• 8-SMS 
• 9-Directed Pickup 
• 10-Call Park 
• 11-DTMF 
• 12-Voice Mail 
• 13-Speed Dial
• 14-Intercom 
• 15-Line 
• 16-BLF 
• 17-URL 
• 18-Group Listening 
• 20-Private Hold 
• 22-XML Group 
• 23-Group Pickup 
• 24-Multicast Paging 
• 25-Record 
• 27-XML Browser
• 34-Hot Desking 
• 35-URL Record 
• 38-LDAP 
• 39-BLF List 
• 40-Prefix 
• 41-Zero Touch 
• 42-ACD 
• 45-Local Group 
• 46-Network Group 
• 49-Custom Button 
• 50-Keypad Lock
• 55-Meet-Me Conference 
• 56-Retrieve Park 
• 57-Hoteling 
• 58-ACD Grace 
• 59-Sisp Code 
• 60-Emergency 
• 61-Directory

DND Sync

• bw.feature_key_sync="0"

Disable the DND Feature on Yealink Phone

• features.dnd.allow = 0

 After auto-provision and it takes effect, the DND feature can’t be used even though the user press the DND softkey on the keypad.

 

Daylight Savings Time

0 = Disabled 1 = Enabled 2= Automatic

local_time.summer_time="0"

Time Format

0 = 12- Hour Format     1 = 24- Hour Format

local_time.time_format ="0"

Allow Screen Capture via YMCS without Authorization

static.remote_control.1.allow="1"

Jitter Buffer to Fixed

• voice.jib.adaptive="1"
• voice.jib.min="120"
• voice.jib.max="120"
• voice.jib.normal="120"

SIP Scanner Protection

• features.direct_ip_call_enable="0"
• sip.trust_ctrl="1"
• sip_trust_ctrl="1" (only for Firmware under v80)

Update Auto Answer Tone

Please see the following guide for different tones you can set: https://support.yealink.com/en/portal/knowledge/show?id=d78743e1aeb7fc964a6f93bd

• voice.tone.autoanswer="1400/500,0/15000"

Increase Time Out for Dial Now Rule

• phone_setting.dialnow_delay="x"
  • Acceptable values: 1-14 (seconds)

Increase HTTP/HTTPS File Transfer Timeout

• network.attempt_expired_time="<seconds>"

Enable Missed Call Logs

• account.1.missed_calllog="1"

Provisioning Guide

http://support.yealink.com/documentFront/forwardToDocumentDetailPage?documentId=143

Speed Dial to Voicemail Without Entering PIN

features.enhanced_dss_keys.enable="1"                                                                               linekey.X.type="73"                                                                                                                               linekey.X.line="1"                                                                                                           linekey.X.label="Speeddial VM"                                                             linekey.X.value=”9900,Extension,,,PIN#” 

(Replace 'X' with the number of the BLF key you are setting) The overrides above will let you have a BLF key as a Speed dial to dial into a voicemail box without entering a PIN 

Example: Extension 101 has 1234 PIN, the override will look like this: linekey.10.value=”9900,101,,,1234#

Setup Wi-Fi via Override

Via override, you can "pre-install" Wi-Fi SSIDs on Yealink phones once provided. Please replace the X with a number, starting at 1, you can setup up to 99 SSIDs.

static.wifi.function.enable="1"

Enables the Wi-Fi feature.
static.wifi.enable="1"

This enables Wi-Fi mode.
static.wifi.X.ssid="Wi-Fi SSID"
static.wifi.X.security_mode="WPA/WPA2 PSK"

Permitted values: NONE, WEP, WPA/WPA2 PSK, WPA3-Personal, 802.1x EAP
static.wifi.X.password="Wi-Fi Password"

Change Transfer Mode

By default, the Transfer mode is Attended Transfer, you can change this mode on devices via this override:

transfer.dsskey_deal_type="X"

Replace X with one of the following:

• 0 - New Call
• 1 - Attended Transfer (this is the default)
• 2 - Blind Transfer
• 4 - Optional Selection

Transfer Call History

Enables or disables the phone to log the transfer party's phone number in the call history list. :

0-Disabled, the phone will log the transfer-to party's phone number in the call history list.

1-Enabled

features.save_init_num_to_history.enable = 0

Enabling Auto Answer via Override

Please use the following override either via domain or via phone hardware page. You will need to just X accordingly to the account this will affect.

account.x.auto_answer="1"
0 = Disabled
1 = Enabled, the phone can automatically answer an incoming call.

NOTE: The phone cannot automatically answer the incoming call during a call or while dialing even if auto answer is enabled.