Grandstream GDS3710 to Yealink T58 Video Call Setup
Written by Marissa Orsini
Updated at March 14th, 2024
Table of Contents
Scope:
This document will help you adjust the settings on the GDS3710 with firmware XXXX to allow audio and video during a call on your hosted PBX service.
Requirements:
- Access to the phone's GUI
- SIP Credentials - Find how to get them here
- GDS Firmware: 1.0.5.2
- Yealink Firmware 58.83.0.56
Configure GDS3710 via Web GUI
- Log in to GDS3710 Web GUI
NOTE: Username is admin, default password is printed on the back panel of the device - Complete the following fields using the SIP credentials from the Manager Portal
- Account Name: Name of the device
- SIP Server: Enter the Domain/Proxy
- Outbound Proxy: sbc.ucaasnetwork.com
- SIP User ID: Enter the Username
- Authentication ID: Enter the Username
-
Password: Enter the Password
- Go to Door System Settings
- Call Mode: SIP Number
- Doorbell Mode: Call Doorbell Number
- Door Bell Call Mode: Serial Hunting
-
Number Called When Door Bell Pressed: Extension of the Yealink phone
- Go to SIP Setting > SIP Advanced Settings > Enable SIP Proxy Compatibility Mode